Nearly every conversation about AI threat detection reaches the same question within ten minutes: we already have a SIEM, so do we need this too?
Here’s the short answer: for most security teams, no. You don’t need both. The job you bought a SIEM to do, catching attacks, is the job a SIEM does worst. AI threat detection does it better, without the detection engineering bill. The rest of what you pay a SIEM for can be covered for a fraction of the cost.
Disclosure: I work on Logster, which is built to take over that job, so I have an obvious view. This article sets out the case for SIEM replacement, so you can check the reasoning against your own environment rather than take my word for it.
What you’re actually paying a SIEM for
Strip away the marketing and a SIEM does four jobs:
- Collect logs from across the estate.
- Keep them, often for a year or more.
- Search across them during an investigation.
- Alert when incoming events match rules someone has written.
Only one of these protects you: the fourth. Collecting and keeping logs doesn’t stop an attack. Searching them helps only after something has already told you to look. Detection is the reason the SIEM exists, and it’s where most SIEM deployments quietly fail.
Why SIEM detection fails
A SIEM detects what its rules describe and nothing else. That one fact causes most of the problems security teams live with.
Every rule is a piece of engineering nobody has time for
Someone has to understand an attack technique, write a query that matches it, test it against real data, and tune it until the false positives are bearable. Then they maintain it, forever, as log formats, software versions and attacker tooling change.
Most mid-size organisations bought a SIEM without the headcount to do this. They are running the vendor’s default content on a platform priced for far more, and calling it detection.
Rules only catch what has been seen before
A rule matches a pattern. Attackers who change the pattern slip between rules. They rename the tool, use a built-in system utility instead, or split one step across two processes. Detection engineers respond with broader rules. Broader rules are the noisy ones, and noisy rules are the first to be tuned down when the queue gets bad.
You pay by volume, so you stop collecting what matters
SIEM pricing is usually tied to how much data you send. The activity that shows an intrusion on a host, such as what ran, what it launched and what it connected to, is also among the highest-volume data you have. Teams under budget pressure filter or drop it. The SIEM ends up covering the logs that were cheap to keep, and missing the ones that would have shown the attack.
Alerts arrive without the story
A rule fires on one event. The analyst then rebuilds everything else by hand. What ran before this? What ran after? Is this host a build server? That assembly is most of the triage time. It’s repeated for every related alert, because rules don’t know that five of them belong to the same incident. We’ve written about what that costs, and it’s usually more than the SIEM licence.
Put together, you have a platform that is expensive to feed and expensive to staff, and that still misses anything nobody wrote a rule for.
What AI threat detection does instead
AI threat detection starts from a different question. It doesn’t ask “does this match a rule?”. It asks “does this behaviour look like an attack?”
- It judges sequences, not single events. An office application starting a script interpreter, which downloads a file, which schedules a task: each step is unremarkable, and the chain is alarming. Behavioural detection evaluates the chain.
- It isn’t fooled by names. Renaming a credential-dumping tool changes its filename, not what it does. Detection grounded in behaviour still sees what it does.
- Coverage doesn’t wait for a rule. You don’t need a detection engineer to have anticipated each technique before it can be caught.
- Its output is an incident, not an alert. Related activity is grouped into one incident, with an explanation of what happened and the evidence behind each step. The context-gathering that eats triage time is already done.
That’s the whole of the SIEM’s detection job, done without rule-writing, without tuning debt, and without trading coverage for ingest budget.
Side by side
| SIEM | AI threat detection | |
|---|---|---|
| How it detects | Rules your team writes and maintains | Judging behaviour against what attacks look like |
| Renamed tools and new techniques | Missed until someone writes a rule | Caught by what they do, not what they’re called |
| What reaches the analyst | Individual alerts, context assembled by hand | One incident, explained, with its evidence |
| Staffing it needs | Detection engineers, permanently | Analysts to review verdicts |
| Cost pressure | Grows with data volume, so coverage shrinks | Coverage isn’t traded away to stay under an ingest limit |
| The question it answers | “Did anything match what we wrote?” | “Is something happening right now?” |
“But we need the SIEM for compliance”
This is the objection that keeps most SIEM contracts alive, so it’s worth taking apart.
Frameworks such as PCI DSS, ISO 27001 and SOC 2 require you to collect logs, protect them, keep them for a defined period and review them. They don’t require you to do it in a SIEM. A SIEM is the most common way to meet those obligations, and one of the most expensive, because you pay detection-platform prices to store data that mostly sits untouched until an auditor asks for it.
Once detection lives elsewhere, retention becomes a storage problem. Low-cost archive storage, sized to what your obligations actually cover, does that job for a fraction of the price. Check with your auditor which sources you have to keep and for how long. The answer is usually narrower than “everything, at SIEM prices”.
SIEM replacement, step by step
You don’t have to rip anything out on day one. A sensible SIEM replacement looks like this:
- Audit what your SIEM actually catches. Pull every rule that produced a true positive in the last twelve months. For most teams it’s a short list, and it’s the real bar the replacement has to clear.
- Run AI detection alongside it. Give it at least two weeks on your own data. Run known attack techniques during that window and compare what each one caught and what each one sent to your analysts.
- Move detection and investigation over. Once the new platform is catching what the SIEM caught, and more, make it where analysts work.
- Move retention to archive storage. Size it to your actual compliance obligations, not to whatever the SIEM happened to be ingesting.
- Cut ingest, then cancel at renewal. Stop paying to send data to a platform that no longer does the detecting.
A note on “AI SIEM”
SIEM vendors have noticed all this, and most have added an AI assistant. These are genuinely useful for writing queries and summarising alerts. But an assistant that explains what your rules found doesn’t change what your rules can find. The detection underneath is still the same rules.
The question to ask any product with “AI” on the box: does the AI decide, or does it describe? If it only describes, you’re paying more for the same blind spots.
How Logster replaces it
Disclosure again: this is the vendor section.
Logster is built to take over your SIEM’s detection and investigation job. It watches Windows and Linux endpoints, judges behaviour as it happens, and reports each finding as one incident. Each incident comes with a plain-language account of what happened, mapped to MITRE ATT&CK, and every step of that account links to the events behind it. Analysts investigate in the same place they’re alerted. There are no rules to write and no detection backlog to maintain.
It fits in alongside what you already run during the migration. It can receive data from Splunk forwarders you already have deployed, so you don’t need to re-instrument your estate to start a trial. It runs as SaaS, in a private cloud, or entirely on your own infrastructure, including air-gapped networks. We’re extending the same approach to firewall and network flow logs, which takes over another large share of what SIEMs are bought to watch.
Run it next to your SIEM on your own data and compare what each one tells you. There’s more on how it works and what it costs, which is worth setting against your current SIEM bill. Or talk to us about planning your SIEM replacement.
Common questions
Can AI threat detection replace a SIEM?
For the job most organisations bought a SIEM to do, catching attacks, yes, and it does that job better: it catches renamed tools and unfamiliar techniques that rules miss, and it does it without a detection engineering team. Long-term log retention for compliance is a separate need, and low-cost archive storage meets it far more cheaply than SIEM ingest.
Can Logster replace my SIEM?
For detection and investigation, that’s what it’s built for. Pair it with archive storage sized to your compliance obligations and most teams no longer need a SIEM. Run both side by side first and let the comparison on your own data make the decision.
Is the SIEM dead?
As the place where detection happens, it’s on its way out. Rule-based detection can’t keep up with how fast attacker tooling changes, and the cost model pushes teams to collect less of the data that matters. What remains is log storage and search, and that no longer has to cost what a SIEM costs.
Do I need a SIEM for compliance?
Usually not by name. Frameworks such as PCI DSS, ISO 27001 and SOC 2 require logs to be collected, protected, retained and reviewed, not a specific product. Confirm with your auditor which sources and retention periods apply, then meet them with storage priced for storage.
What happens to the SIEM rules we already have?
Start by finding out which ones ever caught anything. Then, during the side-by-side trial, check that the replacement catches the activity those rules were written for. Most of what they target is behaviour, which behavioural detection covers without anyone maintaining a query.
Will AI detection add more alerts to my queue?
It should reduce them, because related activity arrives as one incident instead of many alerts. Make the vendor prove it: count what reaches a human during the trial. Our twelve questions for evaluating detection vendors cover how to run that test fairly.
Related reading
- What is an AI SOC analyst, and what should it prove before you trust it?
- 12 questions that actually separate threat detection vendors
- What alert fatigue actually costs you, a cost model you can run on your own numbers
- You can’t just paste logs into an LLM
- How Logster turns endpoint activity into explained incidents
If you’ve replaced a SIEM, or tried to and stopped, I’d like to hear what made the difference. The objections that kept the SIEM in place are often more useful than the reasons for switching.